A universal jumbo controller can be used to operate electronic devices like your DVD player, TV set, and home theater systems. For this content, we will be focusing on Vizio TV. We will list and explain the codes you will need to program a universal jumbo controller for your Vizio device.
What Are The Codes Used To Program Jumbo Universal Controllers And Operate Vizio?
There are many codes for the jumbo universal controller. These codes come in different digits. We will list the codes for operating different Vizio devices with a Jumbo universal controller. After this, we will highlight how to program these codes for Vizio. Here are the codes:
Two-digit Jumbo universal controller code for Vizio TV:
• 19
Three-digit Jumbo universal controller codes for Vizio TV:
• 505
• 502
• 113
• 627
• 011
• 004
Four-digit Jumbo universal controller codes for Vizio TV:
• 1758
• 1756
• 0178
• 0128
• 1017
• 0117
• 1078
• 0056
• 0030
• 0205
• 1004
• 1292
Five-digit universal controller codes for Vizio TV
• 10117
• 10178
• 01377
• 11756
• 10885
• 10120
• 10864
Four-digit universal controller codes for Vizio soundbar:
• 1517
Five-digit universal controller codes for Vizio soundbar:
• 31517
Five-digit universal controller code for Vizio Blue-Ray device:
• 22563
How Can You Program Your Jumbo Universal Controller?
Now we have listed the different code options available to help you program a Jumbo universal controller to use any Vizio device. Let us highlight how to program a universal controller for a Vizio TV with these codes. Follow the different phases to understand more:
• Switch on your TV set.
• Make sure your universal controller is pointed at your Vizio TV then press and hold code search.
• Take your fingers off after 5 seconds. This will activate the indicator lights on your controller.
• Once the indicator comes on, tap the TV button on your controller. It is at the top side of the controller.
• At this point keep tapping the on/off switch on your controller repeatedly. Do this until your TV goes off. Note that it may take a while for your Vizio device to turn off because of the many codes on the roaster.
• Once your TV goes off tap enter on the controller and saves the jumbo universal controller code.
• You can now do a test run to determine if the programming worked. Simply try to operate your Vizio TV with your Jumbo universal controller.
If your jumbo universal controller doesn’t work for your TV after following the steps above, repeat these programming steps.
Can You Reset Your Jumbo Universal Controller?
The answer is yes. You can format your Jumbo universal controller. There are certain features that you must know before you can successfully reset your universal controller. When a hard reset is done on a universal controller, the codes that you must have stored for any of your devices will automatically delete. Considering the process you’ll have to follow to get these codes it will be best not to do a hard reset on your jumbo universal controller. However, if you feel the best thing to do is to reset your universal controller, follow these steps listed here:
For those who have the chip model R00 of the universal controller, do the following:
Press the Green key along with the yellow key and hold them at the same time.
Do this until the indicator blinks twice.
Type 981 code.
After inputting the code, the indicator will blink four times. This means the deletion process has been initiated and the controller has been reset successfully.
For users who own the chip model R01 of the jumbo universal controller. You can reset your controller by following the below steps:
Take out the battery from the universal controller.
Press any of the buttons on your universal controller to discharge the power.
Put in the battery. This causes the indicator blink twice.
Hold down numbers two and eight at the same time. Hold down for 6 seconds. This will make the indicator blink twice. This means the reset has been taken back to factory settings.
Final Words
There is a wide range of codes for the jumbo universal controller. These controller codes come in multiple digits as highlighted above. The different digits and how to apply them have been stated above. You can reset your jumbo universal controller by following a few steps.
